All-in-one module tester

I‑V, EL and HiPot. One station.

Place the module once. Get its power, its picture and its safety.

A Nexun EVO, PRO or PRO Max can be configured as an all-in-one tester. The I‑V flash measures the power, the electroluminescence camera images every cell, and the HiPot tester proves the insulation, one after the other, on the same bench. One scan, one placement, one result per module.

Illustration
I‑V flashPower, Isc, Voc, FF
EL picture65 MP, every cell
HiPotUp to 6 kV
One recordSN 2611-04217
  • I‑V curve
  • EL picture
  • HiPot result
Module verdictPASS
One module, three tests, one record under its serial number.

Why one station

Three tests usually means three stations

On many lines the flash tester, the EL tester and the HiPot tester stand apart, each with its own conveyor transfer, its own software and its own file. Bringing them onto one bench changes that.

  • Handled once

    The module is placed and contacted once. Fewer transfers mean less floor space and fewer chances to damage it.

  • One serial number, one record

    The barcode is read once and the I‑V curve, the EL picture and the HiPot result are saved together under it. Nothing to match up afterwards.

  • One verdict

    Pass or fail for the module, from all three tests, ready for your line control and your MES.

  • One software

    Pasan Studio runs the flash, the camera and the tester, with one recipe per panel type.

The three tests

What each one tells you

  • Power, Isc, Voc, FF

    I‑V flash

    Maximum power, Isc, Voc and fill factor under a full-LED solar simulator, from A+ A+ A+ (EVO) up to A++ A+ A++ (PRO and PRO Max) per IEC 60904-9.

    Nexun systems
  • 65 MP, every cell

    Electroluminescence

    A 65-megapixel picture of the whole module at Isc and at a tenth of Isc, with an anomaly analysis that scores every cell: cracks, dark cells, finger and soldering defects.

    Electroluminescence Imaging
  • Up to 6 kV

    HiPot

    Dielectric withstand up to 6 kV DC, insulation resistance and frame continuity, so every module ships insulated and bonded.

    HiPot Testing

How it runs

From scan to verdict

Each test starts as soon as the previous one has released the module, not after processing or saving.

  1. The barcode is scanned and the module recipe is loaded. Scanning never starts a test: the module may not be in place yet.
  2. The I‑V flash measures the module.
  3. Electroluminescence starts as soon as the flash is over: the module is powered at Isc and at a tenth of Isc and the camera takes the pictures.
  4. When the EL supply has released the module, its leads switch to the HiPot tester and the test plan runs.
  5. The I‑V curve, the EL picture and the HiPot result are saved together, with one verdict for the module.

Your choice

All in one, or only what you need

Every Nexun measures I‑V. Add electroluminescence, HiPot, or both, to match your quality plan. The station, the software and the record stay the same.

Questions we are often asked

What is an all-in-one PV module tester?

A single station that runs the I‑V flash test, the electroluminescence (EL) test and the HiPot safety test on a module without moving it, and saves the three results together.

Can I take only I‑V and EL, without HiPot?

Yes. EL and HiPot are separate options. The Nexun can test I‑V alone, I‑V with EL, I‑V with HiPot, or all three.

Does it connect to my production line?

The Nexun EVO is built for it: PLC signals, conveyors, barcode reading and MES integration. Tell us your line and we configure the station around it.

Which standards do the tests follow?

The I‑V flash is classified per IEC 60904-9. The EL pictures follow IEC TS 60904-13. The HiPot test is modelled on IEC 61215-2 MQT 03 and IEC 61730-2 MST 13 and MST 16, with the limits you set.

Rather we contact you?

Leave your email and we will get back to you. No form to fill in.

We only use your address to answer you. Privacy policy

Power, picture and safety, in one placement.

Tell us your module format and your line, and we will propose the Nexun and the options that fit.